HIKOKI
HIKOKI
Sort by
Show result
  • Features

    • Variable speed by dial and trigger
    • Large soft grip for comfortable operation
    • Motor with two ball-bearings for longer life and efficient power transmission
    • Lightweight: 1.5kg
    • Dust blowing for clear view over cut line
    • Connectable directly with a dust collector without adapter

    Specifications

    Capacity Wood 65mm (2-5/8")
    Mild Steel Plate 6mm (1/4")
    Min. Cuttng Radus 25mm (1")
    Base Tilt Angle 45º Right/Left
    Power Input 400W
    Length of Stroke 18 mm (45/64")
    No-Load Speed(stroke) 0 - 3,000/min.
    Overall Length 197mm (7-3/4")
    Weight 1.5kg (4.2 lbs.)
    Standard Accessories Blade, Splinter Guard, Chip Wrench

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Easy to Work with

    • Easy to Work with

    Runtime per Charge*

    • Approx. 100 Screws in Wood
      (Low Speed + Drill Mode, ø5.8 x 45mm wood screws into American pine with ø4mm pilot holes)
      Approx. 130 Holes in Wood
      (Low Speed + Drill Mode, ø18 x 18mm holes into American pine)
      Approx. 50 Holes in Steel
      (High Speed + Drill Mode, ø6.5 x 1.6mm holes into mild steel)
      Approx. 20 Holes in Mortar
      (High Speed + Impact Drilling Mode, ø3.4 x 30mm holes into mortar)

      • With the BSL 1225M battery. The presented runtimes are shown for reference purposes and may vary according to conditions.

      Runtime per Charge

    Other Features

    • 3 Operation Modes (Screw-tightening / Drilling /Impact Drilling)
    • 20-stage Clutch
    • Keyless Chuck
    • LED Light

            

    12V PEAKSlide Lithium-Ion Batteries

    • BSL1225M

      2.5Ah / BSL1225M

    Lightweight. Compact. High-Capacity*.

    • Applies to the BSL1240M.

    Clear Battery Status Indication(BSL1240M / BSL1225M only)

    • The remaining battery indicator lamp shows not only charge level but also battery overheating and failure when they occur.

      Remaining battery indicator lamp / Remaining battery indicator switch

    Indicator Lamp
    Solid

    Solid

    Solid

    Solid

    Flashing
    Battery Charge State 75% and above 50% - below 75% 25% - below 50% Below 25% 0%
    Indicator Lamp
    Flashing

    Flashing
    Battery Charge State Output suspended due to high temperature*1 Output suspended due to failure*2
    1. Remove the battery from the tool and allow it to cool down fully.
    2. The problem may be with the battery so please contact your dealer.

    Class-leading* Charging Speed

    Approx. 37min with BSL1225M Battery

    Fast Charger

    UC12SL
    Fast Charger

    • As of November 2018, among 10.8V slide Lithium-ion batteries made by leading power tool manufacturers. (Survey by Koki Holdings)

    BSL1240M / BSL1225M / BSL1215 12V Peak Slide Lithium-ion Battery

    Model   BSL1225M  
    Voltage 10.8 - 12V Peak
    Capacity   2.5Ah  
    Charging Time at 20℃*   Approx. 37min
    (with UC12SL)
     
    Dimensions (L x H x W)   86 x 42 x 65mm  
    Compatible Charger UC12SL
    • The charging time may vary depending on the operating conditions and battery state.

    Specifications

    Drill Chuck 0.8 - 10mm
    Capacity Brick 8mm
    Steel 10mm
    Wood 29mm
    Wood Screw 5.8mm
    Machine Screw 6mm
    Tightening Torque Hard 38Nm
    Soft 15Nm
    Torque Setting 0.6 - 4.0Nm
    Battery Voltage 10.8 - 12V Peak
    No Load Speed High 0 - 1,400/min
    Low 0 - 350/min
    Impact Rate High 0 - 21,000/min
    Low 0 - 5,250/min
    Overall Length 181mm
    Weight*1 1.2kg(with BSL1225M)
     
    Standard Accessories*2 2 Batteries (BSL1225M), Charger (UC12SL), Battery Cover, Carrying Case
    1. According to EPTA-Procedure 01/2014.
    2. Standard accessories vary by country or area.
  • Easy to Work with

    • Easy to Work with

    Runtime per Charge*

    • Approx. 100 Screws in Wood
      (Low Speed + Drill Mode, ø5.8 x 45mm wood screws into American pine with ø4mm pilot holes)
      Approx. 130 Holes in Wood
      (Low Speed + Drill Mode, ø18 x 18mm holes into American pine)
      Approx. 50 Holes in Steel
      (High Speed + Drill Mode, ø6.5 x 1.6mm holes into mild steel)

      • With the BSL 1225M battery. The presented runtimes are shown for reference purposes and may vary according to conditions.

      Runtime per Charge

    Other Features

    • 20-stage Clutch
    • Keyless Chuck
    • LED Light

            

    12V PEAKSlide Lithium-Ion Batteries

    • BSL1225M

      2.5Ah / BSL1225M

    Clear Battery Status Indication(BSL1225M)

    • The remaining battery indicator lamp shows not only charge level but also battery overheating and failure when they occur.

      Remaining battery indicator lamp / Remaining battery indicator switch

    Indicator Lamp
    Solid

    Solid

    Solid

    Solid

    Flashing
    Battery Charge State 75% and above 50% - below 75% 25% - below 50% Below 25% 0%
    Indicator Lamp
    Flashing

    Flashing
    Battery Charge State Output suspended due to high temperature*1 Output suspended due to failure*2
    1. Remove the battery from the tool and allow it to cool down fully.
    2. The problem may be with the battery so please contact your dealer.

    Class-leading* Charging Speed

    Approx. 37min with BSL1225M Battery

    Fast Charger

    UC12SL
    Fast Charger

    • As of November 2018, among 10.8V slide Lithium-ion batteries made by leading power tool manufacturers. (Survey by Koki Holdings)

    BSL1240M / BSL1225M / BSL1215 12V Peak Slide Lithium-ion Battery

    Model   BSL1225M  
    Voltage 10.8 - 12V Peak
    Capacity   2.5Ah  
    Charging Time at 20℃*   Approx. 37min
    (with UC12SL)
     
    Dimensions (L x H x W)   86 x 42 x 65mm  
    Compatible Charger UC12SL
    • The charging time may vary depending on the operating conditions and battery state.

    Specifications

    Drill Chuck 0.8 - 10mm
    Capacity Steel 10mm
    Wood 29mm
    Wood Screw 5.8mm
    Machine Screw 6mm
    Tightening Torque Hard 38Nm
    Soft 15Nm
    Torque Setting 0.6 - 4.0Nm
    Battery Voltage 10.8 - 12V Peak
    No Load Speed High 0 - 1,400/min
    Low 0 - 350/min
    Overall Length 166mm
    Weight*1 1.1kg(with BSL1225M)
    Standard Accessories*2 2 Batteries (BSL1225M), Charger (UC12SL), Battery Cover, Carrying Case
    1. According to EPTA-Procedure 01/2014.
    2. Standard accessories vary by country or area.

Features

  • Soft grip for easier handling
  • 28 piece pccessory kit for various applications
  • Variable speed trigger to suit multiple drilling applications
  • Forward and reversible for convenience



  •  

Specifications

Model   DV13VST
Drill Chuck   1.5-13mm
Capacity Metal   13mm(1/2")
Masonry   13mm(1/2")
Wood   25mm(1")
Power Input 550W
No Load Speed 0-3,000/min.
Full Load Impact Rate 0-48,000/min (BPM)
Overall Length   295mm(11-39/64")
Weight   1.8kg(4.0lbs.)
Standard Accessories* Side Handle, Depth Stopper, Accessory Kit
  • Standard accessories vary by country or area.
  • Features

    • Lightweight: 11.9kg
    • Thumb actuated positive miter stops for quick and easy adjustment
    • Soft grip handle
    • Equipped with chip deflector
    • Pivoting Sub-Fence for supporting larger stock

    Specifications

    Capacity Blade Dia. 255mm (10")
    (H x W) Cross Cut 0º 59 x 144mm or 89 x 101mm
    (2-5/16 x 5-21/32 or 3-1/2 x 3-31/32")
    (H x W) Miter Cut 45º 59 x 102mm or 89 x 70mm
    (2-5/16 x 4 or 3-1/2 x 2-3/4")
    (H x W) Miter Cut 52º 59 x 89mm or 89 x 54mm
    (2-5/16 x 3-1/2 or 3-1/2 x 2-1/8")
    (H x W) Bevel Cut 45º 41 x 144mm (1-5/8 x 5-21/32")
    Compound Mter 45º and Beve 45º 41 x 102mm (1-5/8 x 4")
    Power Input 1,520W
    No Load Speed 5,000/min.
    Miter Angle: Right 0 – 52º
    Left 0 – 52º
    Bevel Angle Left 0 – 45º
    Positive Angle Stop 0, 15, 22.5, 31.6 and 45º
    Dimensions 460 x 628 x 561mm
    (18-1/8 x 24-3/4 x 22-3/32")
    Weight 11.9kg (26.2 lbs.)
    Standard Accessories Blade, Dust Bag, Vise Assy, Sub Fence,Wrenches

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories are subject to change by areas.

  • Features

    • Powerful 450W motor
    • 15% faster speed*1
    • Compact and lightweight*1
    • Variable speed
    • Reversible by lever switch
    • The D10VST(L) meets regulations on Electro-Magnetic Compatibility



    •  
    •  
    • Dust box easy to remove

      • Keyed chuck or keyless chuck available by country or area.
    • Dust box easy to remove

      • Attachable to an optional drill stand*2

      Note: Mounting part dimensions of D10VST and D10VST(L)
      Dia x Length: Approx. Φ43 x 12mm

    Specifications*3

    Chuck Capacity 10mm (3/8")
    Capacity: Steel 10mm (3/8")
    Capacity: Wood 25mm (1")
    Power Input 450W
    No Load Speed 0 - 3,200/min.
    Overall Length (with Keyed Chuck) 227mm (8-15/16")
    Overall Height (with Keyless Chuck) 176mm(6-15/16"): D10VST / D10VST(L)
    186mm(7-5/16"): D10VST / D10VST(L)(L)
    Weight (with Keyed Chuck) 1.2kg (2.6lbs.)
    Standard Accessories Chuck Wrench
    1. In comparison with the conventional model FD10SB.
    2. Optional drill stand may not be sold in some countries and areas.
    3. Speci cations and standard accessories are subject to change by areas.
     

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Powerful & Lightweight

    Powerful Motor Provides Faster Drilling Speed and More Overload Durability

    Approx.15% Faster Drilling Speed, Approx.10% More Overload Durability

    1. Drilling speed comparison when drilling into steel with a ø10 metal working drill bit, based on the speed index of the previous model taken as 100.
    2. Torque comparison when the motor burns out, based on the durability index of the previous model taken as 100.
    3. The values are for reference purposes. They vary according to conditions.

    Variable Speed Trigger Switch with Speed Control Dial

    • The speed control dial allows users to adjust the pull of the trigger switch and maintain a consistent rotation speed.

      Image of Variable Speed Trigger Switch with Speed Control Dial

    Keyless / Keyed Chuck *

    Keyless chuck for quick tool-less bit changes. Keyed chuck for secure hold of the drill bit.

    • Chuck type varies by region.

    Image of Keyless / Keyed Chuck

    Robust Cylindrical Housing

    • Image of Robust Cylindrical Housing

    Optional Side Handle

    • For more stability, an optional side handle can be attached on either side of the gear cover.
      (Code No. 981205)

      Image of Optional Side Handle

    Specifications

    Drill Chuck Capacity 10mm (3/8")
    Capacity Steel Twist Bit 10mm (3/8")
    Wood Flat Spade Bit 32mm (1-1/4")
    Auger Bit 25mm (1")
    Power Input 600W
    No Load Speed 0 - 2,500/min
    Overall Length Keyless Chuck 242mm (9-17/32")
    Keyed Chuck 238mm (9-3/8")
    Weight *1 1.4kg (3.0lbs.)
    Vibration Total Values *2
    (triax vector sum)
    Drilling into Metal Vibration emission value ah, D = 3.2m/s2
    Uncertainty K = 1.5m/s2
    Standard Accessories Chuck Wrench(only for keyed chuck)
    1. Weight according to EPTA-Procedure 01/2003.
    2. Vibration total values (triax vector sum) were measured according to EN60745.

    Optional Accessories

    Part Name Code No.
    Hook 982593
    Hook (A) 370716

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Features

    • Powerful motor with Soft Start (CC14STDU)
    • 2,200W power input
    • Quick lock vise for fast, precise clamping of materials
    • Spark diversion guard
    • Spindle lock allows fast and easy wheel changes
    • Standard handle (CC14ST)
    • Ergonomically designed D-shaped handle for a more comfortable hand position (CC14STDU, CC14STD)

    Specifications

    Model CC14ST    
    Capacity:Cut-off Wheel Dia. 355mm (14")
    Power Input 2,200W
    No Load Speed 3,800/min.
    Max Workng Perphera Speed 4,800m/min.
    Dimensions (L x W x H) 590 x 300 x 640mm
    (23-7/32" x 11-13/16" x 25-3/16")
     
    Weight 17.0kg (37.4 lbs.)
    Standard Accessories Cut-off Wheel, Wrench

    Max cutting dimensions *

    Shape of material to be cut Cutting angle 0° Cutting angle 45°
    Shape of material to be cut 130mm (5-1/8") 115mm (4-1/2")
    Shape of material to be cut 120mm (4-47/64") 104mm (4-3/32")
    Shape of material to be cut 95mm x 200mm
    (3-3/4" x 7-7/8")
    115mm x 104mm
    (4-1/2" x 4-3/32")
    Shape of material to be cut 137mm (5-7/16") 100mm (4")
    • Maximum cutting dimensions represent the allowable cutting dimensions when the cut-off wheel is not significantly worn.

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • 14.4V and highest torque (Max Torque Hard) in the class * : 50N・m (443in.-lbs.)

    • As of June 2014. Among 14.4V cordless Impact Driver Drills made by leading power tool manufacturers (surveyed by Koki Holdings.)

    13mm single sleeve keyless chuck is operable with one hand

    • The sleeve can be turned with one hand. The driver bits can be easily replaced by holding the main unit with one hand while turning the sleeve with the other hand.

      13mm single sleeve keyless chuck

    Adjustable clutch: 22-stage torque

    Can be used for various applications such as tightening small screws and drilling by adjusting the tightening torque in 22 stages by clutch dial.

    Adjustable clutch: 22-stage torque

    Built-in white LED light

    • The LED Light automatically keeps on lighting while the trigger switch is being pulled.

      For illuminating work surface LED light

    Slim and soft grip handle

    • Fits user's hand comfortably.

      Slim and soft grip handle

    Optional hook can be attached

    • Convenient hook is available.

      Optional Accessory
      Hook set : Code No. 337131

      Optional hook can be attached

    Selectable battery

    • Compatible with not only the standard batteries BSL1415 (1.5Ah) and BSL1425 (2.5Ah) but also optional Our 14.4V high capacity BSL1440 (4.0Ah) and BSL1450 (5.0Ah) Lithium-ion batteries.

      Selectable battery

    Specifications

    Drill Chuck 2.0 - 13mm (5/64 - 1/2") Keyless
    Capacity: Brick 13mm (1/2")
    Capacity: Mild Steel 13mm (1/2")
    Capacity: Soft Wood 32mm (1-17/64")
    Capacity: Wood Screw (D x L) 8 x 50mm (#20 x 2")
    Capacity: Machine Screw 6mm (1/4")
    Battery Voltage 14.4V
    No Load Speed: High 0 - 1,400/min.
    No Load Speed: Low 0 - 350/min.
    Max Torque Hard 50Nm (443 in.-lbs.)
    Max Torque Soft 20Nm (177 in.-lbs.)
    Torque Setting 1 - 6Nm (9 - 53in.-lbs.)
    Overall Length 220mm (8-21/32")
    Weight * 1.6kg (3.5lbs.) with BSL1415 / BSL1425
    Standard Accessories 2 Batteries (BSL1415 or BSL1425), Charger (UC18YKSL or
    UC18YFSL), Battery Cover, Carrying Case
    • According to EPTA-Procedure 01/2003

    Charging Time for Compatible Batteries

    Battery Type
    Voltage Type Capacity*1 Cooling
    Windows
    UC18YGSL
    UC18YKSL
    UC18YRSL*2
    UC18YFSL*2
    UC18YML2*2
    (AC/DC)*3
    14.4V BSL1415 1.5Ah 40min. 22min. 22/60min
    BSL1415X 1.5Ah 40min. 22min. 22/60min
    BSL1420 2.0Ah 60min. 30min. 30/80min
    BSL1425 2.5Ah 75min. 35min. 35/100min
    BSL1430 3.0Ah 90min. 45min. 45/120min
    BSL1440 4.0Ah 120min. 60min. 60/160min
    BSL1450 5.0Ah 150min. 75min. 75/200min
    1. The figures of battery capacity are nominal values.
    2. With cooling fan.
    3. Two-way AC/DC charger usable with in-car power source.
     

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Compact body *

Overall Length : 220mm (8-21/32")

    • In comparison with the conventional model DV18DSFL.

    Compact body

18V and highest torque (Max Torque Hard) in the class*3 : 55N・m (487in.-lbs.)

  • As of June 2014. Among 18V cordless Impact Driver Drills made by leading power tool manufacturers (surveyed by Koki Holdings.)

13mm single sleeve keyless chuck is operable with one hand

  • The sleeve can be turned with one hand. The driver bits can be easily replaced by holding the main unit with one hand while turning the sleeve with the other hand.

    13mm single sleeve keyless chuck

Adjustable clutch: 22-stage torque

Can be used for various applications such as tightening small screws and drilling by adjusting the tightening torque in 22 stages by clutch dial.

Adjustable clutch: 22-stage torque

Built-in white LED light

  • The LED Light automatically keeps on lighting while the trigger switch is being pulled.

    Built-in white LED light

Slim and soft grip handle

  • Fits user's hand comfortably.

    Slim and soft grip handle

Optional hook can be attached

  • Convenient hook is available.

    Optional Accessory
    Hook set : Code No. 337131

    Optional hook can be attached

Selectable battery

  • Compatible with not only the standard batteries BSL1815 (1.5Ah) and BSL1825 (2.5Ah) but also optional Our 18V high capacity BSL1840 (4.0Ah) and BSL1850 (5.0Ah) Lithium-ion batteries.

    Selectable battery

Specifications

Drill Chuck 2 - 13mm (5/64 - 1/2") Keyless
Capacity: Brick 13mm (1/2")
Capacity: Mild Steel 13mm (1/2")
Capacity: Soft Wood 38mm (1-1/2")
Capacity: Wood Screw (D x L) 8 x 75mm (#20 x 3")
Capacity: Machine Screw 6mm (1/4")
Battery Voltage 18V
No Load Speed: High 0 - 1,400/min.
No Load Speed: Low 0 - 350/min.
Impact Rate 0 - 19,600/min.
Max Torque Hard 55Nm (487 in.-lbs.)
Max Torque Soft 23Nm (204 in.-lbs.)
Torque Setting 1 - 6Nm (9 - 53in.-lbs.)
Overall Length 220mm (8-21/32")
Weight * 1.7kg (3.8lbs.)
Standard Accessories 2 Batteries (BSL1815 or BSL1825), Charger (UC18YKSL or
UC18YFSL), Driver Bit, Carrying Case
  • According to EPTA-Procedure 01/2003

Charging Time for Compatible Batteries

Battery Type
Voltage Type Capacity*1 Cooling
Windows
UC18YGSL
UC18YKSL
UC18YRSL*2
UC18YFSL*2
UC18YML2*2
(AC/DC)*3
18V BSL1815 1.5Ah 40min. 22min. 22/60min
BSL1815X 1.5Ah 40min. 22min. 22/60min
BSL1820 2.0Ah 60min. 30min. 30/80min
BSL1825 2.5Ah 75min. 35min. 35/100min
BSL1830 3.0Ah 90min. 45min. 45/120min
BSL1840 4.0Ah 120min. 60min. 60/160min
BSL1850 5.0Ah 150min. 75min. 75/200min
  1. The figures of battery capacity are nominal values.
  2. With cooling fan.
  3. Two-way AC/DC charger usable with in-car power source.
 

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Features

  • Fine bit depth adjustment
  • Soft grip

Specifications

Capacity: Collet Chuck 6.35mm (or 6mm)
Power Input 505W
No Load Speed 32,000/min.
Overall Height 207mm
Weight 1.5kg
Standard Accessories Trimmer Guide Ass'y, Straight Guide Ass'y, Template Guide, Wrenches

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Features

    • Power input 715W and max power output 870W

    Specifications

    Capacity: Wheel Dia 100mm (4")
    Capacity: Hole Dia 16mm (5/8")
    Spindle Thread M10 x 1.5
    Power Input 715W
    No Load Speed 12,000/min.
    Overall Length 260mm
    Weight 1.5kg (3.3 lbs.)
    Standard Accessories Depressed Center Wheel, Wrench

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Best in class durability*1

    Best in class Approx. 19% Higher Durability

    Best in class grinding performance*1 with a powerful 600W motor

    Best in class Approx. 5% Higher Grinding Performance

    Newly-designed large fan and optimized air flow ensure efficient motor cooling
    for a long lifetime

    • Newly-designed large fan and optimized air flow ensure efficient motor cooling for a long lifetime

    Smallest grip circumference in its class*1 for more comfort

    • Slim grip 197mm

    Specifications

    Model G 10SS2    
    Capacity: Wheel Dia 100mm (4")    
    Capacity: Hole Dia 16mm (5/8")  
    Spindle Thread M10 x 1.5  
    Power Input 600W
    No Load Speed 11,500/min. : 220-240V
    12,000/min. : 110-120V
    Overall Length 254mm (10")
    Weight*3 1.7kg (3.8lbs.)    
    Standard Accessories Side Handle, Wrench
    1. As of April 2015. Among 500W-600W class disc grinders made by leading power tool manufacturers. (Surveyed by Koki Holdings.)
    2. In comparison with the previous models G10SS.
    3. Weight according to EPTA-Procedure 01/2003.
     

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Features

    • Power input 200W
    • Large soft grip for comfort and control
    • Dust collection

    Specifications

    Capacity: Pad Size 110 x 100mm (4-3/8 x 4")
    Power Input 200W
    Orbital Dia. 1.5mm (1/16")
    No Load Speed: Spindle 14,000/min.
    No Load Speed: Orbit 28,000/min.
    Overall Length 137mm (5-3/8")
    Weight 1.1kg (2.4 lbs.)
    Standard Accessories Sanding Paper, Dust Bag
     

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Features

  • Rigid aluminum base for fine cut
  • Complied for CE, European standard
  • Side handle easy to grip
  • Backward dust emission

Specifications

Capacity Blade Dia. 190mm (7-1/2")
Max Cutting depth 90º 68mm (2-11/16")
Max Cutting depth 45º 46mm (1-7/8")
Power Input 1,050W
No Load Speed 5,500/min.
Overall Length 291mm (11-15/32")
Weight 3.4kg (7.5lbs.)
Standard Accessories Blade, Guide, Wrench

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Features

  • Power Input 1,710W
  • Lightweight among 1,700W class Hikoki circular saws
  • Enhanced max cut depth
  • Blower over base
  • Specifications

    Capacity Blade Dia. 185mm (7-1/4")
    Max Cut Depth 90º 62mm (2-7/16")
    Max Cut Depth 45º 47.5mm (1-7/8")
    Bevel Capacity 0 - 45º
    Power Input*1 1,710W
    No Load Speed 6,000/min.
    Overall Length 310mm (12-13/64")
    Weight 4.3kg (9.5lbs.)
    Standard Accessories Blade, Guide, Wrench
  • Features

    • Variable speed trigger switch with speed control dial

    Specifications

    Capacity: Air Velocity 0 – 89m/s
    Capacity: Air Volume Flow 0 – 3.4m3 /min
    Power Input 550W
    No Load Speed 0 - 16,000/min.
    Overall Length 493mm
    Weight 1.7kg
    Standard Accessories Nozzle

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Features

    • For 17mm (21/32") hexagon bit shank
    • Power input 1,050W
    • Plastic-covered front grip for comfortable holding
    • Side handle with rubber grip
    • Easy-to-use slide type retainer
    • Functional and robust design

    Specifications

    Power Input 1,050W
    Full Load Impact Rate 3,000/min.
    Bit Shank 17mm (21/32") Hexagon
    Overall Length 460mm (18-1/8")
    Weight 5.0kg (11.0lbs.)
    Standard Accessories Side Handle, Bull Point, Carrying Case

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Best in class overload durability*1

approx. 20% up*2

1. Halved stator coils for sufficient cooling efficiency increase motor durability.
2. Motor is protected from dust and debris through the labyrinth construction.

Overload durability approx. 20% up

Best in class lightweight*1 4.9kg

3. Stator core downsized by 6mm in diameter *3 to reduce the weight.
This results in an increase in max power output per unit mass.

Max power output per unit mass approx. 32% up

More comfort and control

  • 4. Large switch lever for more control.

    action photo

Specifications

Capacity: Wheel Dia 180mm (7")
Capacity: Hole Dia 22.23mm (7/8")
Spindle Thread M14 x 2
Power Input 2,000W
No Load Speed 8,500/min.
Overall Length 469mm (18-1/2")
Weight *3 4.9kg (10.8lbs.)
Standard Accessories Side Handle, Wrench
  1. As of September 2014. Among the 2,000W class disc grinders made by leading power tool manufacturers. (Surveyed by Koki Holdings.)
  2. In comparison with the previous model G18SS.
  3. In comparison with the previous models G18SW and G18SS.
  4. Weight according to EPTA-Procedure 01/2003.
 

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Feeding nylon line

    The nylon head automatically feeds more nylon line when it is tapped.

    Trimming along edges

    The trimmer head can be rotated 180 degrees by pressing the lock button, and used as an edger with ease.

    Conveniently adjustable center pipe

    The center pipe length can be adjusted in 12 steps.

    Shoulder belt included as standard

    An adjustable shoulder belt is included as standard for less arm fatigue.

    Lock-off button

    Unless the lock-off button is pressed, the switch cannot be engaged for safety. 

    Cord holder

    Holding an extension cord with the cord holder prevents the extension cord from unexpectedly disconnecting. 

    Specifications

    Model CG25SC  
    Voltage 230V  
    Power Input 400W  
    Cutting Capacity Dia. 250mm  
    No Load Speed of Trimmer 11,000/min.  
    Dimensions (L x W x H) 955-1,185 x 249 x 325mm
    (37-19/32" - 46-21/32"
    x 9-13/16" x 12-13/16")
     
    Weight 2.3kg (5.1lbs.)  
    Standard Accessories Protective Glass, Shoulder Belt, Nylon Line (Spare)

    Trimming tips

    Move the trimmer from right to left

  • Cutting grass by moving the trimmer from right to left will direct grass clippings away from you and prevent them from dirtying your clothes. It is preferable to cut as widely as 1m.
  • Use the end of the nylon line to cut grass. Cutting as much as possible with the whole line will lower the motor speed and efficiency. Continued use under such conditions with high load may lead to motor damage. In those conditions, cut less grass at a time after lifting the nylon line off the grass and pulling the switch trigger to increase the motor speed.
  • Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Features

  • High-pressure hose length: 5m
  • Vertical type for easy storage
  • Lightweight compact design for easy use
  • Built-in thermal protector
  • With handle for easy movement
  • Rotary ON/OFF switch for convenient use
  • Specifications

    Power Input 1,400W
    Max. Discharge Pressure 7.0MPa (1MPa: 10.2 kgf/cm2)
    Max Permissible Pressure 10.0MPa
    Max Feed Pressure 0.7MPa
    Max Water Discharge 5.5L/min
    Permissible Temperature 40°C or less
    Water Feeding Method Faucet connection type
    Dimensions (L x W x D) *1 305 x 245 x 465mm (12" x 9-5/8" x 18-1/4")
    Weight *2 5.4kg (11.9lbs.)
    Standard Accessories Trigger gun, High-pressure hose (5m), Variable nozzle, Detergent bottle nozzle, Water feed connector, Nozzle cleaner pin, Cord holder, Gun holder, Handle (with 2 attachment screws)
  • Including the handle, power cord holder, gun holder and water feed connector.
  • Weight: Excluding the power cord, weight consists of trigger gun, high-pressure hose, variable nozzle, water feed connector and accessory holder.
  •  

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Features

  • Power input 690W
  • Offset of chuck: 23.5mm
  • Soft grip handle
  • Variable speed by dial and trigger
  • Reversible by push button

Specifications

Drill Chuck 1.5-13mm (1/16 - 1/2")
Capacity: Concrete Hi: 13mm(1/2") Lo:18mm (11/16")
Capacity: Steel Hi: 8mm(5/16") Lo: 13mm (1/2")
Power Input 690W
No Load Speed Hi: 0-3,000/min.
Lo: 0-1,000/min.
Full Load Impact Rate Hi: 27,300/min.
Lo: 8,400/min.
Overall Length 333mm (13-1/8")
Weight 2.0kg (4.4lbs.)
Standard Accessories Side Handle, Depth Gauge, Carring Case, Chuck Wrench

 

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard
accessories may vary from country to country.

Features

  • Variable speed
  • Tool-less blade change by lever
  • A new orbital locus and balance design for smooth cutting
  • Powerful input 720W
  • 3-mode orbital action
  • LED light
  • Soft grip Handle
  • Dust blowing for clear view over cut line
  • Dust collection adapter included

Specifications

Capacity Wood 110 mm (4-5/16")
Mild Steel Plate 10mm (3/8")
Min. Cuttng Radus 25mm (1")
Base Tilt Angle 45º Right/Left
Power Input 720W*
Length of Stroke 26mm (1")
No-Load Speed(stroke) 850 – 3,000/min.
Overall Length 246mm (9-41/64")
Weight 2.2kg (4.9lbs.)
Standard Accessories Blade, Splinter Guard, Chip Cover, Dust Collection Adapter,Carrying Case

 

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Features

  • Max Cutting Depth: 1.5mm (1/16")
  • Rabbeting depth: 9mm (11/32")
  • Power input 580W
  • No load speed 17,000/min.
  • Compact and lightweight 2.5kg
  • Easy to adjust cutting depth by knob
  • Optional dust bag or elbow can be connected

Specifications

Capacity: Cutting Width 82mm (3-1/4")
Max Cutting Depth 1.5mm (1/16")
Power Input 580W
No Load Speed 17,000/min.
Overall Length 296mm (11-21/32")
Weight 2.5kg (5.5lbs.)
Standard Accessories Blades, Blade Setting Gauge, Guide, Wrench

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Increased Durability

    Approximately 2 times longer life *1 achieved by reliable structure that includes a hammering mechanism same as our large hammers.

    High-durability hammering mechanism

    1. Hammering mechanism features air channel system (NEW)
    Up to 50% more volume of air cushion *1 reduces wear and damage inside cylinder.
    2. Ball bearings (NEW)
    Ball bearing seals in grease and holds temperature low to protect melt down of gear cover.
    3. New internal pressure control mechanism (NEW)
    Provides smooth airflow in or out of the gear cover to stabilize and ensure hammering action.

    Located on the side of the tool body for easy operation!

    Large change lever (NEW)

    •   Rotation Only
       For drilling in steel or wood, etc.
        (with optional drill chuck and chuck adapter)

       

        Rotation + Hammering
       For drilling into concrete, etc.

       

        Hammering Only
       (3-mode models only)
       Chiseling of concrete or groove digging, etc.

      Large change lever

    • Angle adjustment function (3-mode models only)
      When using a cold chisel or cutter, the orientation of the tool tip can be adjusted by setting the change lever as shown on the left.

      Angle adjustment function

    Simple bit mounting

    One-push action for quick bit mounting

    • A bit can be mounted by simply inserting it into the tool holder.

      Simple bit mounting

    Specifications

    Model DH24PH  
    Capacity: Concrete 3.4 - 24mm (1/8" - 15/16")  
    Capacity: Steel 13mm (1/2")  
    Capacity: Core bit 25 - 50mm (1" - 2")  
    Capacity: Wood 32mm (1-1/4")  
    Power Input 730W  
    Bit Shank SDS-plus  
    No-Load Speed 0 - 1,050min-1  
    Full-Load Impact Rate 0 - 3,950min-1  
    Overall Length 367mm (14-7/16")  
    Weight (excluding cord) *2 2.7kg (6.0lbs.)  
    Vibration Total Values
    (triax vector sum) *3
    Hammer drilling into concrete
    Vibration emission value
    ah, HD = 15.3m/s2
    Uncertainty K = 1.5m/s2
     
    Vibration Total Values
    (triax vector sum) *3
    Equivalent chiselling value
    Vibration emission value
    ah, CHeq = 11.1m/s2
    Uncertainty K = 1.5m/s2
     
    Standard Accessories Side Handle, Depth Gauge, Carrying Case
    1. In comparison with conventional models DH24PC3
    2. Weight: According to EPTA-Procedure 01/2003.
    3. The tri-axial vibration values were measured according to EN60745-2-6.
     

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Approximately 2 times longer life *1 achieved by reliable structure that includes a hammering mechanism same as our large hammers.

    High-durability hammering mechanism

    1. Hammering mechanism features air channel system (NEW)
    Up to 50% more volume of air cushion *1 reduces wear and damage inside cylinder.
    2. Ball bearings (NEW)
    Ball bearing seals in grease and holds temperature low to protect melt down of gear cover.
    3. New internal pressure control mechanism (NEW)
    Provides smooth airflow in or out of the gear cover to stabilize and ensure hammering action.

  • Powerful motors and optimized hammering to improve work efficiency.

    Faster Drilling Speed

  • Located on the side of the tool body for easy operation!
    Large change lever (NEW)

  •   Rotation Only
     For drilling in steel or wood, etc.
      (with optional drill chuck and chuck adapter)

     

      Rotation + Hammering
     For drilling into concrete, etc.

     

      Hammering Only
     (3-mode models only)
     Chiseling of concrete or groove digging, etc.

    Large change lever

  • Angle adjustment function (3-mode models only)
    When using a cold chisel or cutter, the orientation of the tool tip can be adjusted by setting the change lever as shown on the left.

    Angle adjustment function

  • Soft and easy to grip for comfortable operation!
    Double-molded side handle (NEW)

  • 360° rotation allows more effective operation.

    Side handle

  • Simple bit mounting
    One-push action for quick bit mounting

  • A bit can be mounted by simply inserting it into the tool holder.

    Simple bit mounting

  • Specifications

    Model DH26PC
    Capacity: Concrete 3.4 - 26mm (1/8" - 1")
    Capacity: Steel 13mm (1/2")
    Capacity: Core bit 25 - 50mm (1" - 2")
    Capacity: Wood 32mm (1-1/4")
    Power Input 830W
    Bit Shank SDS-plus
    Impact Energy 3.2 Joules
    No-Load Speed 0 - 1,100min-1
    Full-Load Impact Rate 0 - 4,300min-1
    Overall Length 367mm (14-7/16")
    Weight (excluding cord) *3 2.8kg (6.2lbs.)
    Vibration Total Values
    (triax vector sum) *4
    Hammer drilling into concrete
    Vibration emission value
    ah, HD = 14.8m/s2
    Uncertainty K = 1.5m/s2
    Vibration Total Values
    (triax vector sum)*4
    Equivalent chiselling value
    Vibration emission value
    ah, CHeq = 11.1m/s2
    Uncertainty K = 1.5m/s2
    Standard Accessories Side Handle, Depth Gauge, Carrying Case

     

  • In comparison with conventional models DH24PC3 / DH24PB3
  • As of June 2013. Among 2kg class rotary hammers made by leading power tool manufacturers, surveyed by Koki Holdings.
  • Weight: According to EPTA-Procedure 01/2003.
  • The tri-axial vibration values were measured according to EN60745-2-6.
  •  

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Increased Durability

Approximately 2 times longer life *1 achieved by reliable structure that includes a hammering mechanism same as our large hammers.

High-durability hammering mechanism

1. Hammering mechanism features air channel system (NEW)
Up to 50% more volume of air cushion *1 reduces wear and damage inside cylinder.
2. Ball bearings (NEW)
Ball bearing seals in grease and holds temperature low to protect melt down of gear cover.
3. New internal pressure control mechanism (NEW)
Provides smooth airflow in or out of the gear cover to stabilize and ensure hammering action.

Faster Drilling Speed
  • Powerful motors and optimized hammering achieved up to 30% faster drilling speed *3 to improve work efficiency.

    Faster Drilling Speed
Reduction of vibration

Features User Vibration Protection (UVP) system that reduces the vibrations from concrete drilling or chiselling with resonance occured by moving a weight in the oppo site direction to the movement of the hammer. Reduction of vibration by approximately 33% *5 makes operations more comfortable.

Vibration Protection (UVP) system

Located on the side of the tool body for easy operation!

Large change lever (NEW)

  •   Rotation Only 
     For drilling in steel or wood, etc. 
      (with optional drill chuck and chuck adapter)

     

      Rotation + Hammering 
     For drilling into concrete, etc.

     

      Hammering Only 
     (3-mode models only) 
     Chiseling of concrete or groove digging, etc.

    Large change lever
  • Angle adjustment function (3-mode models only)
    When using a cold chisel or cutter, the orientation of the tool tip can be adjusted by setting the change lever as shown on the left.

    Angle adjustment function

Soft and easy to grip for comfortable operation!

Double-molded side handle (NEW)

  • 360° rotation allows more effective operation.

    Side handle

Simple bit mounting

One-push action for quick bit mounting

  • A bit can be mounted by simply inserting it into the tool holder.

    Simple bit mounting

Specifications

Model DH28PCY  
Capacity: Concrete 3.4 - 28mm (1/8" - 1-1/8")  
Capacity: Steel 13mm (1/2")  
Capacity: Core bit 25 - 50mm (1" - 2")  
Capacity: Wood 32mm (1-1/4")  
Power Input 850W  
Bit Shank SDS-plus  
No-Load Speed 0 - 1,100min-1  
Full-Load Impact Rate 0 - 4,300min-1  
Overall Length 367mm (14-7/16")  
Weight (excluding cord) *6 2.9kg (6.4lbs.)  
Vibration Total Values
(triax vector sum)*7
Hammer drilling into concrete
Vibration emission value 
ah, HD = 11.5m/s2
Uncertainty K = 1.5 m/s2
 
Vibration Total Values
(triax vector sum) *7
Equivalent chiselling value
Vibration emission value 
ah, CHeq = 10.5m/s2
Uncertainty K = 1.5 m/s2
  
Standard Accessories Side Handle, Depth Gauge, Carrying Case
  1. In comparison with conventional models DH24PC3 / DH24PB3
  2. As of June 2013. Among 2kg class rotary hammers made by leading power tool manufacturers, surveyed by Koki Holdings.
  3. A comparison of the model DH28PCY and the conventional model DH24PC3. Mean value for drilling into concrete with drill bits between 8mm and 28mm diameters. The results may vary depending on operating conditions.
  4. As of June 2013. Among 2kg class rotary hammers made by leading power tool manufacturers, surveyed by Koki Holdings.
  5. In comparison with conventional models DH24PC3 / DH24PB3
  6. Weight: According to EPTA-Procedure 01/2003.
  7. The tri-axial vibration values were measured according to EN60745-2-6.
 

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • PH2
  • 10pcs
  • Screw bits
  • Hitachi Original

Features

  • Fine bit depth adjustment
  • Soft grip

Specifications

Capacity: Collet Chuck 6.35mm (or 6mm)
Power Input 505W
No Load Speed 32,000/min.
Overall Height 207mm
Weight 1.5kg
Standard Accessories Trimmer Guide Ass'y, Straight Guide Ass'y, Template Guide, Wrenches

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • Features

    • Soft grip handle

    Specifications

    Chuck Capacity 1.5 - 10mm
    Capacity: Steel 10mm
    Capacity: Wood 20mm
    Power Input 450W
    No Load Speed 0 - 3,000/min.
    Overall Length 245mm
    Weight 1.3kg
    Standard Accessories Chuck Wrench

    Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

  • 2 X 12V 2.5AH BATTERY
  • 1 X UC12SL FAST CHARGER
  • 1 YEAR WARRANTY